A
-
Abdoli Hosseinabadi, Ayoob
Accuracy improvement of inertial navigation error propagation model for increasing efficiency of integrated navigation system [Volume 9, Issue 1, 2020, Pages 63-70]
-
Abdoli Hosseinabadi, Ayoob
Extraction of calibration navigation blocks using monte carlo analysis [Volume 9, Issue 2, 2020, Pages 153-163]
-
Adami, Mahmood
The effect of bowed rotor and nozzle on performance of an axial turbine of turbojet engine on design point [Volume 9, Issue 2, 2020, Pages 41-51]
-
Afghari, Mohamadreza
Numerical simulation of gas-liquid two-phase flow in the aircraft fluidic anti-icing system by volume of fluid method [Volume 9, Issue 1, 2020, Pages 141-156]
-
Afshari, Ebrahim
Numerical simulation of heat pipe and study of geometric parameters and working fluid on its thermal performance for aerospace applications [Volume 9, Issue 1, 2020, Pages 247-260]
-
Aghaei Togh, Reza
Improving fuel consumption and reducing pollutant production in the upgraded gas microturbine combustion chamber based on limited geometric change [Volume 9, Issue 1, 2020, Pages 221-235]
-
Alizadeh Pahlavani, Mohammad Reza
Design and implementation of maximum power point tracking converter based on constant voltage method for use in nano-satellite power supply [Volume 9, Issue 1, 2020, Pages 7-21]
-
Arvan, Majid
Shape optimization of a unimorph piezoelectric energy harvesting beam [Volume 9, Issue 2, 2020, Pages 255-266]
-
Asghari, Saeed
Numerical simulation of heat pipe and study of geometric parameters and working fluid on its thermal performance for aerospace applications [Volume 9, Issue 1, 2020, Pages 247-260]
-
Atyabi, Seyed Ali
Numerical simulation of heat pipe and study of geometric parameters and working fluid on its thermal performance for aerospace applications [Volume 9, Issue 1, 2020, Pages 247-260]
-
Azizi Moghaddam, Hossein
Design and implementation of maximum power point tracking converter based on constant voltage method for use in nano-satellite power supply [Volume 9, Issue 1, 2020, Pages 7-21]
B
-
Babaie, Fateme
Numerical and experimental modeling of the effect of seam schemes on thermal performance of multilayer insulations [Volume 9, Issue 2, 2020, Pages 7-21]
-
Bagherzadeh, Seyed Amin
Flight performance analysis of a migratory bird using flight mechanics equations [Volume 9, Issue 1, 2020, Pages 23-38]
-
Baniasadi, Ehsan
Numerical simulation of heat pipe and study of geometric parameters and working fluid on its thermal performance for aerospace applications [Volume 9, Issue 1, 2020, Pages 247-260]
-
Baniasadi, Ehsan
Numerical and experimental modeling of the effect of seam schemes on thermal performance of multilayer insulations [Volume 9, Issue 2, 2020, Pages 7-21]
-
Bolhasani, Mohamad
Three-dimensional elasticity solution for vibro-acoustic behavior of cylinder in the presence of subsonic flow [Volume 9, Issue 2, 2020, Pages 243-254]
C
-
Charkhgard, Mohammad
Designing, implementation and validation of a laboratory for sun sensor test and calibration [Volume 9, Issue 1, 2020, Pages 209-220]
D
-
Daneshjo, Kamran
Three-dimensional elasticity solution for vibro-acoustic behavior of cylinder in the presence of subsonic flow [Volume 9, Issue 2, 2020, Pages 243-254]
-
Dehestani Kelagar, Arash
Design and implementation of maximum power point tracking converter based on constant voltage method for use in nano-satellite power supply [Volume 9, Issue 1, 2020, Pages 7-21]
-
Dehghan, S.M. Mehdi
Designing, implementation and validation of a laboratory for sun sensor test and calibration [Volume 9, Issue 1, 2020, Pages 209-220]
-
Dehghani, Reza
Fabrication and characterization of metallic cellular lattice structures using indirect additive manufacturing [Volume 9, Issue 2, 2020, Pages 207-220]
-
Dehghani Mohammad Abadi, Mohsen
A state-based approach to modeling helicopter accidents using machine learning [Volume 9, Issue 2, 2020, Pages 125-136]
-
Dehghan Manshadi, Mojtaba
Numerical investigation of performance of a training airplane in developed spin conditions [Volume 9, Issue 2, 2020, Pages 89-99]
-
Delalat, Meysam
Three-dimensional tracking of aerial maneuvering target using a visual sensor [Volume 9, Issue 2, 2020, Pages 137-152]
E
-
Eskandari, Mohammad Amin
Analysis of dynamic transition process in RL-10 liquid rocket engine [Volume 9, Issue 1, 2020, Pages 197-207]
F
-
Farajollahi, Amirhamzeh
Numerical investigation on the effect of creating grooves inside the injector nozzle on the diesel and biodiesel engine fuels spray behavior [Volume 9, Issue 2, 2020, Pages 65-76]
-
Farrokh, Mojtaba
Shape optimization of a unimorph piezoelectric energy harvesting beam [Volume 9, Issue 2, 2020, Pages 255-266]
-
Fatehi, Mohammad
Optimal design of monopropellant hydrogen peroxide propulsion control system for a satellite orbital transfer system under uncertainty [Volume 9, Issue 2, 2020, Pages 177-192]
G
-
Ghasemloy, Sajad
Aerodynamic analysis of a re-entry capsule with consideration of radiation heat transfer [Volume 9, Issue 1, 2020, Pages 171-183]
-
Ghayour, Alireza
Experimental investigation of different plasma vortex generator configurations for compressible flow control [Volume 9, Issue 1, 2020, Pages 125-139]
-
Golestani, Ali
Numerical investigation of performance of a training airplane in developed spin conditions [Volume 9, Issue 2, 2020, Pages 89-99]
H
-
Haghani, Ahmad
Study of bending behavior of delamination in circular composite plate using third order shear deformation theory [Volume 9, Issue 2, 2020, Pages 221-231]
-
Haghighi, Behrad
Simulation of transient two phase flow in the centrifugal pump during start up time and evaluation of effective parameters on the performance of the pump [Volume 9, Issue 2, 2020, Pages 77-87]
I
-
Irani, Saied
Shape optimization of a unimorph piezoelectric energy harvesting beam [Volume 9, Issue 2, 2020, Pages 255-266]
J
-
Jabbari, Mohammad
Kinematic modeling of a continuum tendon robot for space applications [Volume 9, Issue 2, 2020, Pages 233-242]
-
Jafari, Abolfazl
Evaluation of the central crack effect on the buckling behavior of an isogrid plate with optimized stiffening lattice [Volume 9, Issue 1, 2020, Pages 83-97]
-
Jafarmadar, Samad
Experimental investigation the effect of Fe3O4 nanoparticle on the performance and emission of SI gasoline fueled with mixture of dimethyl ether and gasoline [Volume 9, Issue 1, 2020, Pages 261-271]
K
-
Karamooz Ravari, Mohammad Reza
Fabrication and characterization of metallic cellular lattice structures using indirect additive manufacturing [Volume 9, Issue 2, 2020, Pages 207-220]
-
Karimi, Jalal
Three-dimensional tracking of aerial maneuvering target using a visual sensor [Volume 9, Issue 2, 2020, Pages 137-152]
-
Keshavarz Robehagani, Ahmad Reza
Fabrication and characterization of metallic cellular lattice structures using indirect additive manufacturing [Volume 9, Issue 2, 2020, Pages 207-220]
-
Keshtegar, Behroz
Optimal design of monopropellant hydrogen peroxide propulsion control system for a satellite orbital transfer system under uncertainty [Volume 9, Issue 2, 2020, Pages 177-192]
-
Khalilarya, Shahram
Experimental investigation the effect of Fe3O4 nanoparticle on the performance and emission of SI gasoline fueled with mixture of dimethyl ether and gasoline [Volume 9, Issue 1, 2020, Pages 261-271]
-
Kordjazi, Hossein
Transfer orbit design of LEO to moon using earth-moon system lagrangian points in the presence of disturbances [Volume 9, Issue 2, 2020, Pages 193-206]
-
Kosari, Amirreza
A 3D conflict resolution and collision avoidance based on flight priority for multi-aircraft with game theory [Volume 9, Issue 1, 2020, Pages 49-62]
L
-
Livani, Mostafa
Three dimensional bending analysis of multi-directional functionally graded annular sector thick plates [Volume 9, Issue 1, 2020, Pages 113-124]
M
-
Mahdi, Miralam
Numerical investigation of the effect of nozzle geometry of diesel injector and needle lift on spray formation [Volume 9, Issue 1, 2020, Pages 237-245]
-
Mahdi, Miralam
Numerical analysis of aerodynamic heating effects on temperature distribution inside the ultrasonic bird cabin [Volume 9, Issue 2, 2020, Pages 101-113]
-
Mani, Mahmoud
Experimental investigation of different plasma vortex generator configurations for compressible flow control [Volume 9, Issue 1, 2020, Pages 125-139]
-
Mansourizadeh, Javad
Numerical solution of internal flow and determination of operating factors of open-end and converging-end tangential and swirl injectors [Volume 9, Issue 2, 2020, Pages 53-64]
-
Mesfrosh, Hamid
Numerical and experimental modeling of the effect of seam schemes on thermal performance of multilayer insulations [Volume 9, Issue 2, 2020, Pages 7-21]
-
Mirhosseini, Seyed Majid
A state-based approach to modeling helicopter accidents using machine learning [Volume 9, Issue 2, 2020, Pages 125-136]
-
Mirmohammadi, Ali
Numerical solution of internal flow and determination of operating factors of open-end and converging-end tangential and swirl injectors [Volume 9, Issue 2, 2020, Pages 53-64]
-
Mokhtari, Mir Abolfazl
Design, control and implementation of a moving object target tracking using image processing [Volume 9, Issue 2, 2020, Pages 165-175]
-
Mollaee, Mohammad Ali
Simulation of transient two phase flow in the centrifugal pump during start up time and evaluation of effective parameters on the performance of the pump [Volume 9, Issue 2, 2020, Pages 77-87]
-
Momeni, Morad
Designing, implementation and validation of a laboratory for sun sensor test and calibration [Volume 9, Issue 1, 2020, Pages 209-220]
-
Moosavian, Aliakbar
Introducing and simulation of two emerging stabilizer mechanisms for trajectory tracking of quadrotor UAVs under disturbance conditions: cross and pendulum stabilizing mechanisms [Volume 9, Issue 2, 2020, Pages 115-124]
-
Mostofizadeh, Ali reza
Numerical simulation of gas-liquid two-phase flow in the aircraft fluidic anti-icing system by volume of fluid method [Volume 9, Issue 1, 2020, Pages 141-156]
N
-
Nosratolahi, Mehran
Three-dimensional tracking of aerial maneuvering target using a visual sensor [Volume 9, Issue 2, 2020, Pages 137-152]
O
-
Ommi, Fathollah
Numerical study of the effect of air injection before fuel injection in supersonic air crossflow [Volume 9, Issue 1, 2020, Pages 185-196]
P
-
Pakmanesh, Mohammad Reza
Numerical and experimental modeling of the effect of seam schemes on thermal performance of multilayer insulations [Volume 9, Issue 2, 2020, Pages 7-21]
-
Pourbafrani, Rouhollah
Introducing and simulation of two emerging stabilizer mechanisms for trajectory tracking of quadrotor UAVs under disturbance conditions: cross and pendulum stabilizing mechanisms [Volume 9, Issue 2, 2020, Pages 115-124]
R
-
Raeisi, Elnaz
Flight performance analysis of a migratory bird using flight mechanics equations [Volume 9, Issue 1, 2020, Pages 23-38]
-
Rahimi, Majid
Numerical analysis of aerodynamic heating effects on temperature distribution inside the ultrasonic bird cabin [Volume 9, Issue 2, 2020, Pages 101-113]
-
Rahmani, Hamed
A state-based approach to modeling helicopter accidents using machine learning [Volume 9, Issue 2, 2020, Pages 125-136]
-
Ramyar, Ramin
Introducing and simulation of two emerging stabilizer mechanisms for trajectory tracking of quadrotor UAVs under disturbance conditions: cross and pendulum stabilizing mechanisms [Volume 9, Issue 2, 2020, Pages 115-124]
-
Razmjooei, Mohammad
Star grain optimization and simulation using genetic algorithm based on high speed codes [Volume 9, Issue 2, 2020, Pages 23-39]
-
Roozbahani, Majid
Numerical investigation of the effect of nozzle geometry of diesel injector and needle lift on spray formation [Volume 9, Issue 1, 2020, Pages 237-245]
S
-
Saboohi, Zoheir
Star grain optimization and simulation using genetic algorithm based on high speed codes [Volume 9, Issue 2, 2020, Pages 23-39]
-
Saboori Darabi, Ebrahim
Transfer orbit design of LEO to moon using earth-moon system lagrangian points in the presence of disturbances [Volume 9, Issue 2, 2020, Pages 193-206]
-
Sadati, Seyed Hosein
Three-dimensional tracking of aerial maneuvering target using a visual sensor [Volume 9, Issue 2, 2020, Pages 137-152]
-
Sadati, Seyeh Hoseyn
Feedback linearization of variable pitch flying robot: improvement of stability and performance [Volume 9, Issue 1, 2020, Pages 71-82]
-
Saeedi, Mohammad
Experimental investigation of different plasma vortex generator configurations for compressible flow control [Volume 9, Issue 1, 2020, Pages 125-139]
-
Sarafraz, Yasin
Feedback linearization of variable pitch flying robot: improvement of stability and performance [Volume 9, Issue 1, 2020, Pages 71-82]
-
Shafiey Dehaj, Mohammad
Simulation of transient two phase flow in the centrifugal pump during start up time and evaluation of effective parameters on the performance of the pump [Volume 9, Issue 2, 2020, Pages 77-87]
-
Shahbazi, Mohammad
Star grain optimization and simulation using genetic algorithm based on high speed codes [Volume 9, Issue 2, 2020, Pages 23-39]
-
Shahmiri, Farid
Feedback linearization of variable pitch flying robot: improvement of stability and performance [Volume 9, Issue 1, 2020, Pages 71-82]
-
Shahriari, Behrooz
The effect of bowed rotor and nozzle on performance of an axial turbine of turbojet engine on design point [Volume 9, Issue 2, 2020, Pages 41-51]
-
Shakarami, Negar
Numerical simulation of heat pipe and study of geometric parameters and working fluid on its thermal performance for aerospace applications [Volume 9, Issue 1, 2020, Pages 247-260]
-
Shams taleghani, Arash
Flow control by magnetohydrodynamic field method at the supersonic air intake [Volume 9, Issue 1, 2020, Pages 157-170]
-
Shirnezhad, Mohsen
Experimental investigation the effect of Fe3O4 nanoparticle on the performance and emission of SI gasoline fueled with mixture of dimethyl ether and gasoline [Volume 9, Issue 1, 2020, Pages 261-271]
-
Shirzadi, Saba
Evaluation of the central crack effect on the buckling behavior of an isogrid plate with optimized stiffening lattice [Volume 9, Issue 1, 2020, Pages 83-97]
T
-
Taheri, Mehradad
Design, control and implementation of a moving object target tracking using image processing [Volume 9, Issue 2, 2020, Pages 165-175]
-
Talebitooti, Roohollah
Three-dimensional elasticity solution for vibro-acoustic behavior of cylinder in the presence of subsonic flow [Volume 9, Issue 2, 2020, Pages 243-254]
-
Tarkashvand, Ali
Three-dimensional elasticity solution for vibro-acoustic behavior of cylinder in the presence of subsonic flow [Volume 9, Issue 2, 2020, Pages 243-254]
-
Toloei, Alireza
Optimal design of monopropellant hydrogen peroxide propulsion control system for a satellite orbital transfer system under uncertainty [Volume 9, Issue 2, 2020, Pages 177-192]
V
-
Vaziry, Mohamad Ali
Numerical simulation of gas-liquid two-phase flow in the aircraft fluidic anti-icing system by volume of fluid method [Volume 9, Issue 1, 2020, Pages 141-156]
Z
-
Zahedzadeh, Mostafa
Numerical study of the effect of air injection before fuel injection in supersonic air crossflow [Volume 9, Issue 1, 2020, Pages 185-196]
-
Zahiripour, Seyed Ali
Accuracy improvement of inertial navigation error propagation model for increasing efficiency of integrated navigation system [Volume 9, Issue 1, 2020, Pages 63-70]
-
Zahiripour, Seyed Ali
Extraction of calibration navigation blocks using monte carlo analysis [Volume 9, Issue 2, 2020, Pages 153-163]
-
Zakeri, Mahnaz
Evaluation of the central crack effect on the buckling behavior of an isogrid plate with optimized stiffening lattice [Volume 9, Issue 1, 2020, Pages 83-97]
-
Zakeri, Manizhe
Kinematic modeling of a continuum tendon robot for space applications [Volume 9, Issue 2, 2020, Pages 233-242]
-
Zamani Gharaghoushi, Ali
The effect of bowed rotor and nozzle on performance of an axial turbine of turbojet engine on design point [Volume 9, Issue 2, 2020, Pages 41-51]
-
Zardashti, Reza
Transfer orbit design of LEO to moon using earth-moon system lagrangian points in the presence of disturbances [Volume 9, Issue 2, 2020, Pages 193-206]
-
Zeinali, Mohammad Hosein
Numerical investigation of performance of a training airplane in developed spin conditions [Volume 9, Issue 2, 2020, Pages 89-99]
Your query does not match with any item